Epson WF-3640 Printing Blank Pages: How to Fix It?

If you have an Epson WF-3640 then you may have faced a problem where the printer itself prints blank pages. This problem should be paid attention to as it stops the process of printing properly. It could be time-consuming and hectic, especially if you face it on a working day. 

If you’re wondering why Epson wf-3640 printing blank pages then you need to dig deeper to find out more!

Possible Factors that Trigger Epson WF-3640 to Print Blank Pages!

Although the causes are relatively minor, however, if not address, can lead to permanent disability of the printer. Here are a few causes that trigger Epson printer printing blank pages problem:

  • The Ink Cartridge might not be installed correctly during the installation time. 
  • Possibly, the ink cartridge may have run out of ink.
  • Or, cartridge is clogged on the inside. 
  • Incorrect paper size on the paper tray for printing. 
  • Else, printer driver may be incompatible or maybe be out of date. 

As you can see, the causes are mostly related to the cartridge. Hence, find out more about what you can do to fix them!

Solutions to Apply when Epson WF-3640 Printing Blank Pages!

If the Epson WF-3640 printer prints blank pages, try the following few easy solutions to resolve the problem. 

Solution 1: Do a thorough check of Ink Cartridges

The first thing you need to do is to check the level of ink in the cartridge. If there is less ink then you may a problem. In that case, replace the entire ink cartridge. 

You may also have a condition where only one of the ink cartridge is low on ink. In that case, you need to replace the empty one with a new ink-filled one. New cartridges have something called protective tape that usually prevent ink leakage.

Another thing that could be is that you may have forgotten to get rid of the protective tape while installing a new cartridge. Check and take the protective tape out unless removing it is not necessary.

Additionally, also, check if the installation of the ink cartridge is done right or not. Many times installation becomes a failure if the placement of the cartridge is not done right. In that case, remove and then reinstall the cartridge into its slot. 

Solution 2: Clean the Nozzles that are Clogged

As you know, if the printer is unchecked for a long time or if it has not been cleaned in a long time then the nozzles of the printer might get clogged. This could lead to the Epson WF-3640 printer to print blank pages.

SImply,  locate the “Home” button on the printer and press it. Then go to the “Setup” option. Click on the option called “Maintenance”.

Then, choose the option called “Printhead Nozzle Check”. After this, the printer itself will start printing a page with a grid of 4 colors to demonstrate which ink nozzle is clogged.

If you notice faint lines of color or there is a gap in between any of the colors, then choose the option called “Clean The Printhead” and then select the “Continue” option.

Keep in mind that you should keep the printer on when it’s cleaning the printer head. Unexpected shut down of the printer during the cleaning process can lead to permanent damage to the printer. 

Solution 3: Upgrade Epson WF-3640 Printer Driver

In order for the Epson WF-3640 to work properly, the printer driver needs to be working fine as well. If the printer driver is corrupted or it has not been updated in a long time then you are likely to face this error.

To get the correct printer driver for Epson WF-3640, all you need to do is go to the official webpage of Epson support. Once you’re on the page, simply search for the compatible driver that will run on whichever version of Windows you use.

Download it and then install it by following the installation setup right away! 

Solution 4: Check the Paper Size

If the paper size is changed manually then it is likely that the printer will be unable to print the file. Instead, it will print a blank page. For this, check if the paper size is correct or not. Usually, printers have an in-built setting for paper size. 

If you’ve made any modification, then it is advisable that you set the default page size by using the “Printer Settings” in the printer. 

Solution 4: Check Basic Stuff

It’s difficult to not miss the tiny details that could lead to this problem. Here are a few small details that you may want to check:

Keep in mind that the printer should be placed on a surface that is flat. If it is on a plane that is even remotely tilted, then the printer won’t work.

Keep a track of your documents that you are printing. Make sure there are no blank pages in the file you are printing if Epson printer print blank pages

Solution 5: Use the “Skip Blank Page” Option

If you are using Mac or Windows OS, then choose the “Skip Blank Page” option that is in the software for the printer.

1. For Windows 10

Visit the “Start” menu and go to “Settings”. From there, choose “Devices”. Then click on “Printers & Scanners. Now, select the “Epson WF-3640” printer and then choose the “Manage” option. Then select the “Printing Preferences”. 

2. For Windows 8.x

From the desktop menu, select “Apps” and then go to “Control Panel”. Then select the ‘Hardware and Sound” option. Choose the “Devices and Printers” option. Choose the Epson WF-3640 printer and then right-click on it to select the “Printer Preferences option. 

3. For Windows 7

Go to the “Start” menu and choose directly the option called “Devices & Printer”. Again, select the printer and then click on “Printer Preferences”

4. Windows Vista

From the “Start” menu, go to “Control Panel”. Under “Hardware and Sound” select the printer and click on “Printer Preferences”.

After this, choose the “Maintenance” option and then click on the option called “Extended Settings”. From there, choose “Skip Blank Page”. Then click on the “OK” option.

5. For Mac OS

Go to the Apple menu and then choose the “System Preferences” option. From there choose “Print & Scan”. Then choose the printer device. After that, choose “Options & Supplies”.

From switch the “Skip Blank Page” option as on. And then click on the “OK” button to save the settings and exit.

crazedpare